Carb Altitude Mixture Compensation Setting

Subject: Carb altitude mixture compensation setting
From: "prg55100"
Date: 4/19/08 10:24 AM
To: G109_Pilots@yahoogroups.com

Dear all,
I placed some pictures in the photo album explaining how I proceed to
set the carb altitude mixture compensation cylinders.
The cylinder has to be dismounted. It has a large needle on the
bottom. The needle shall be located a little proud with the cylinder
bottom side. If the needle is under flush than the mixture is rich.
The mixture is poor when the needle is proud.
The needle can be set with a hex screwer from inside the tube located
on the top of the cylinder. The needle is locked by a side screw.
Don't forget to fill up the carbs with carb oil after setting

Hope this helps some of you.
Pierrot